Don yin kyauta na asali ko kuma numfasa sabuwar rayuwa zuwa cikin jita-jita masu jituwa zai taimaka wajen fasaha . Wannan wata hanya ce ta musamman ta yin ado da wani abu tare da zane da kake so. Lokacin da aka lalata, an sanya sifa da aka zaɓa a kan abu kuma an saita shi a saman tare da varnish. Mun gabatar da hankalinka a matsayin babban mashahuri, yadda za a sake yin amfani da shi a kan gilashin gilashi, idan ana so, za ka iya har ma da lalata.
Da ake bukata:
- Gilashin m gilashi;
- wani adiko, wani hoton, ko hoton da za ku yi ado da farantinku (an ba da shawarar da aka buga a kan kwaturar inkjet);
- acrylic paints;
- fentin gashi;
- kumfa roba;
- almakashi;
- varnish;
- manne, mafi kyau shine PVA, saboda an samo shi ne a kan ruwa, kuma, idan ya cancanta, za'a iya shafe ta da ruwa da sauƙi;
- bayani mai-barasa.
Bari mu je aiki.
Shiri.
- Da farko kana buƙatar shirya wani farantin don aiki. Don yin wannan, cire duk takalma daga gare ta, wanke shi kuma ya bushe shi da kyau. Sa'an nan kuma wajibi ne mu bi da farantin tare da maganin mai maye gurbin, wanda zai lalata filin.
- A lokacin da aka sake yin amfani da hotuna tare da hotunan, kafin yin amfani da hoto daga gefen gaba na TRANCKRIL-ohm, a wasu layuka, ba kowa ya bushe. Bayan mun sanya hoto na minti daya a cikin ruwan dumi kuma cire, mirgina, farar fata na hoto.
- Idan kuna son kwaɗon goge mai haske tare da hoto, to, ku bar taƙalarsa na sama kawai, ba tare da haɓaka ƙananan ba.
Kayan ado.
Lambar zaɓi 1.
- Mun yi amfani da gogewa na budewa a baya na farantin kuma a hankali zane shi da fenti.
- Bayan barin Paint ya bushe kuma cire cire adiko mai mahimmanci.
- Top tare da varnish. Komai, mafi sauƙi sauƙi na farantin yana shirye!
| | |
Lambar zaɓi 2.
- Muna aiwatar da gefen gaba na hoton tare da manne kuma a hankali sanya shi a kan farantin. Yi la'akari da cewa babu wata siffar da ta kasance a tsakanin farantin da alamar.
- A gefen gefen farantin kuma an yi shi tare da kwalliyar sliced, har ma yana gluing shi. Mun bar manne ya bushe.
- Daga sama, muna amfani da takarda na fenti, kuma lokacin da ta bushe, gyara shi duka da varnish.
| | |
| | |
Lambar zaɓi 3.
Yanzu muna amfani da dabara tare da matakan mataki guda daya tare da tasowa baya, wanda zai ba ka tayi kyakkyawan sakamako na "fashe" image.
- A kan ƙasa mara kyau, muna amfani da lalata kuma bari ta bushe.
- Bayan bushewa, shafa murfin da aka rushe tare da zane mai laushi tare da dan Adam. Tsinkaya a hankali cire.
- Aiwatar da lacquer kuma bari ya bushe.
- Sa'an nan kuma muna aikata duk abin da aka riga an bayyana a cikin zaɓi # 2.
| | |
| | | |
