Na'urar haɓaka ta kansu, dubi ainihin asali. Yin amfani da rubutun satini masu haske, za ka iya sanya kyakkyawan bezel mafi kyau, maras kyau. Kuma idan kuna ciyar da dan lokaci kadan da haɗuri, za ku iya juya shi tare da tunaninku a ainihin aikin fasaha.
Don aikin muna buƙatar wannan:
- biyu satin ribbons, da wuri-wuri. Babban abinda ake buƙata don ribbons - daya daga cikin su ya zama haske, ɗayan - duhu, da launuka zasu haɗu da kyau ba kawai tare da juna ba, amma har da launi na gashi;
- Ƙasashen duniya (m);
- biyu na clothespins;
- almakashi;
- haske.
Yadda ake yin bezel daga satin ribbons?
Muna dauka bezel 1 cm m kuma ribbons biyu tare da nisa na 0.6 cm kuma tsawon mita 1.5. Idan nisa daga dam ɗin ya fi girma fiye da wanda aka nuna a misalin, muna buƙatar ɗaukar ribbons. Ga ɗayan mashahuran, mun ɗauki nau'i na launin ruwan hoda da haske masu furanni. Wadannan tabarau sun dace daidai da juna kuma zasuyi kyau akan gashi mai gashi. Don haka, bari mu je aiki!
1. Daga ruwan hoda mai lafaɗɗa guda biyu na santimita biyu da kuma manne a gefen gefen gefen katako.
2. Ɗauki rubutun lalac da kuma mannewa a waje na gindin, ya bar a gefen hagu 3.5 centimeters a gefen gefe.
3. Gwano tsawon ƙarshen tef a kan rafin kuma ɗauka shi a sauƙi a kusurwar hagu.
4. Mun dauki na farko, wanda shine ruwan hoda, tef da manna, kamar yadda a cikin hoton, a cikin kullun na biyu daga ciki.
5. Mun tanƙwara zuwa rubutun ruwan hoda na gefe, tare da saman na biyu, wato, Lilac, kintinkiri.
6. Yanzu aiwatar da gefen katako. Ƙananan ƙarshen tef (3.5 centimeters) an lankwasa zuwa cikin ciki a saman dukkan kaset da kuma glued.
7. Yanzu kunna tef ɗin a waje, kunsa gefen gefen katako, yin amfani da launi na manne a karkashin tef.
8. Ƙarshen tef an gyara tare da manne a gefen katako.
9. Ɗauki rubutun farko da kuma lanƙwara rim zuwa cikin ciki a ƙarƙashin igiya na biyu a kullun.
10. Daga ciki, bezel yana kama da wannan. Kamar yadda kake gani, a gefen biyu hoto yana da kyau kuma cikakke.
11. A waje mun kawo na biyu taf, na farko tef ya kasance a ƙasa.
12. Muna da alamu a cikin nau'i na ƙananan launuka masu launin launuka. Harshen su zai dogara ne akan kusurwar da aka sanya satin ribbons.
13. Ta haka muke iska da dukan bezel.
14. Kashi na biyu an rufe shi a ƙarshen, kamar dai na farko.
| | | |
15. Bayan kammala gilashi kusan zuwa ƙarshen ramin, gyara shi da clothespin. Mun auna ma'auni guda ɗaya na rubutun, wanda zai je gefen gefen kuma ya yanke abin da ya wuce.
16. Taffi na biyu an glu shi zuwa gefen gefen gefen gwal, bayan haka an yanke shi a hankali. Zuwa saman teb ɗin ba a kwashe shi ba a lokacin, a hankali ka cauterize shi da harshen wuta mai haske, yana da mafi dacewa don amfani da wuta don wannan, amma zaka iya ƙona kyandir ko wasa na yau da kullum.
17. Sa'an nan kuma ɗauka a hankali a gefen gefen gindin, tare da bututunsa, kuma ya haɗa maɓallin teburin zuwa ciki. A lokaci guda, muna tabbatar da cewa yana da kyau miƙa, yanzu zaku iya zubar da tip.
18. Dukkanin wannan, zangon satin da hannunsa yana shirye.
| | | |
